Pour qui ?

STACK a été développé par des entrepreneurs, pour les entrepreneurs, généraux et sous-traitants inclus. Avec divers ensembles et articles prédéfinis pour presque toutes les transactions, sa mise en route ne pourrait pas être plus simple !

Notes moyennes

978 avis
  • Note globale 4.5 / 5
  • Facilité d'utilisation 4.5 / 5
  • Service client 4.7 / 5
  • Fonctionnalités 4.2 / 5
  • Rapport qualité-prix 4.3 / 5

Informations sur le produit

  • À partir de 999,00 $US
    Consulter les tarifs
  • Version gratuite Oui
  • Version d'essai gratuite Non
  • Déploiement Cloud, SaaS, web
  • Formation Formation présentielle
    Formation en ligne en direct
    Webinaires
    Documentation
  • Ressources d'aide Service de support permanent (réponse directe)
    En ligne

Informations sur l'éditeur

  • Stack Construction Technologies
  • http://www.stackct.com
  • Fondé en 2011

En savoir plus sur STACK

Le logiciel cloud d'estimation et de calcul des matériaux de construction STACK est facile à utiliser et doté de fonctionnalités permettant d'accélérer votre processus d'appel d'offres afin que vous puissiez collaborer avec votre équipe en temps réel, où que vous soyez. Mieux encore, l'accès à STACK est désormais GRATUIT !

Accédez aux plans de projet partout et à tout moment, depuis n'importe quel appareil.
Faites des offres pour plus de travail, en moins de temps.
Éliminez les erreurs d'estimation coûteuses.
Profitez d'une bibliothèque de bases de données de matériaux personnalisés et prédéfinis.
Gagnez plus de projets rentables !

STACK - Fonctionnalités

  • Aperçu en 3D
  • Création de sections croisées
  • Gestion des sous-traitants
  • Matériaux d'assemblage
  • Pentes et inclinaisons
  • Plans électroniques
  • Travaux d'égalisation du site
  • Vérification de l'élévation
  • Vérification des erreurs
  • Commerce et industrie
  • Devis
  • Facturation
  • Gestion des expéditions
  • Gestion des leads
  • Gestion des ordres de travail
  • Listes de contrôle et inspections
  • Mesure aérienne
  • Planification
  • Prise de clichés
  • Base de données des coûts
  • Devis et offres
  • Facturation
  • Gestion de projets
  • Gestion des clients
  • Gestion des offres
  • Ordres de changement
  • Planification
  • Relevé des matériaux
  • Assemblage préconstruit
  • Base de données des coûts
  • Commerce et industrie
  • Devis et offres
  • Estimation des frais généraux
  • Fonctions pour entrepreneurs
  • Gestion des raccords
  • Importation et exportation de données
  • Ordres de changement
  • Relevé des matériaux
  • Base de données de produits de construction
  • Facturation
  • Gestion de projets
  • Gestion des clients
  • Gestion des devis
  • Gestion des offres
  • Ordres de changement
  • Planification
  • Relevé des matériaux
  • Aménagement paysager
  • Base de données de clients
  • Devis
  • Facturation
  • Gestion de la paie
  • Gestion des contrats
  • Gestion des expéditions
  • Gestion des ordres de travail
  • Gestion des tâches
  • Planification des rendez-vous
  • Routage
  • Suivi du temps
  • Base de données des coûts
  • Commerce et industrie
  • Devis et offres
  • Entretien des équipements
  • Facturation
  • Gestion du financement
  • Importation et exportation de données
  • Planification
  • Relevé des matériaux
  • Taux de travail
  • CRM
  • Coût des tâches
  • Devis
  • Gestion de la comptabilité
  • Gestion des contrats
  • Gestion des fournisseurs
  • Gestion des offres
  • Gestion des services et des garanties
  • Gestion des sous-traitants
  • Gestions des permis
  • Planification des tâches
  • Base de données de sous-traitants
  • Compétences
  • Gestion des tâches
  • Suivi des assurances
  • Suivi des heures de travail
  • Suivi des licences
  • Suivi des permis
  • Accès mobile
  • Base de données de clients
  • Devis
  • Facturation
  • Gestion des expéditions
  • Gestion des ordres de travail
  • Gestion des stocks
  • Gestion des techniciens
  • Gestion des tâches
  • Planification
  • Routage
  • Suivi de l'historique des services
  • Accès mobile
  • Devis
  • Facturation
  • For Commercial and/or Industrial Electrical Contractors
  • Gestion des clients
  • Gestion des contrats
  • Gestion des ordres de travail
  • Planification
  • Suivi du temps

Logiciels similaires

Logiciels équivalents

Avis les plus utiles sur STACK

Still LeAfrning Take off portion not all PDF will scale true.

Publié le 26/05/2017
Stephen M.
Contacts mgr
Construction navale, 13-50 employés
Temps d'utilisation du produit: 1 à 5 mois
Provenance de l'utilisateur 
4/5
Note globale
3 / 5
Facilité d'utilisation
3 / 5
Fonctionnalités
5 / 5
Support client
3 / 5
Rapport qualité-prix
Probabilité de recommander le produit :
Très faible Très élevée

Commentaires: Honestly a learning experience is the best I grt now,

Avantages: Just Inputting and using program to enter ships and drawings of ships in for each class of ship we are working on. once more jobs are entered would like to end up witha square foot to S data base so in futur we can ask how many sqare foot pf bilge in the AMR on a WMSL Class ship and wbhat did we charge as an average for painting by square foot. Now have Started to measure 2s square footage but have not seen or understand hoe to correlate that to job.
Much less how to enter it and pull it out to make a bid I supose that will come in time. First we are verifying what we have and then there will be more data base building from old and new bids as we go , including machinery and equipment needs to use and the material required. The we should be able ask " the customer want us to paint the forward bulkead in the bosn locke dark ble using xxx paint prepared to SSPC SP10 what will the cost be for bid... hpw much profit can we make and also what is the average marie rate for that.

Inconvénients: AS I explained above new at it and have not yet gotten to the point of being a well trained user of it. Howevr it has bothered me when i set in a PDF print use the stated scale and do noy get a known answer ...>>>>>Just Inputting and using program to enter ships and drawings of ships in for each class of ship we are working on. once more jobs are entered would like to end up witha square foot to S data base so in futur we can ask howmany sqare foot pf bilge in the AMR on a WMSL Class ship and wbhat did we charge as an average for painting by square foot. Now have Started to measure 2s square footage but have not seen or understand hoe to correlate that to job.
Much less how to enter it and pull it out to make a bid I supose thst will come in time. First we are verifying what we have and then there will be more data base building from old and new bids as we go , including machinery and equipment needs to use and the material required. The we shold be able ask " the customer want us to paint the fwd bulkead in the bosn locke dark ble using xxx paint prepared to SSPC SP10 what will the cost be for bid... hpw much profit can we make and also what is the average marie rate for that.Workin the marine industry in a land familiar setting.

Réponse de l'éditeur

envoyé par Stack Construction Technologies le 30/05/2017

Hi Stephen,
Thanks so much for your recent feedback!
We are so glad to be able to support the takeoff and estimating needs of All Star Cleaning & Preservation, Inc. and so happy to hear that our software is having a positive impact on your bid process.

We look forward to sharing your input with the entire STACK team. Have an awesome day & thank you again!

Simple and Easy to Use!

Publié le 24/01/2017
Matt C.
Estimator
Construction, 2-10 employés
Temps d'utilisation du produit: plus d'un an
Provenance de l'utilisateur 
5/5
Note globale
5 / 5
Facilité d'utilisation
5 / 5
Fonctionnalités
5 / 5
Support client
3 / 5
Rapport qualité-prix
Probabilité de recommander le produit :
Très faible Très élevée

Commentaires: For very quick masonry estimates, nothing beats this software. For more advanced/detailed prints, as long as you take your time this will work just fine. I haven't seen a friendlier piece of software at an affordable price that gives you want you need without being headache to setup.

Avantages: We looked for a very long time for a very simple takeoff program and this is definitely it. We have used this program for the past year and a half to get measurements on masonry and it has not failed us. Our trade does not need super advanced features so this suites us perfectly. If you have a properly scaled PDF then you can hit the ground running for your measurements. Otherwise, determining your own scale is very simple to do and I've even taken pictures of blueprints with my phone to roughly estimate one of our simpler prints in under 10 prints from the camera snapping. Amazing.

Inconvénients: Due to this program being available online only sometimes it can be finicky if you have a poor internet connection or if there is some sort of (extremely rare) maintenance. As stated earlier, we use this for masonry so it does not need advanced features. But as with all estimating, you will still need a basic knowledge of your trade's quirks. If you can't see a wall on an elevation because it is returning into the building then you will need to approximately draw it in under your elevation based off of a foundation plan or floor plan. Not super hard but it just will not do all of the work for you.

Réponse de l'éditeur

envoyé par Stack Construction Technologies le 24/01/2017

Hi Matt,

Thanks so much for your recent feedback!
We are so glad to be able to support the takeoff and estimating needs of Curley Brothers Brick & Masonry and so happy to hear that our software is having a positive impact on your bid process.

We look forward to sharing your input with the entire STACK team. Have an awesome day & thank you again!

Great product. Customer support right in app and always quick to respond.

Publié le 07/02/2018
Sunshine M.
Commercial Estimator
Matériaux de construction, 13-50 employés
Temps d'utilisation du produit: 6 à 12 mois
Provenance de l'utilisateur 
5/5
Note globale
5 / 5
Facilité d'utilisation
4 / 5
Fonctionnalités
5 / 5
Support client
5 / 5
Rapport qualité-prix

Avantages: This product is incredibly simple to use, but a very powerful tool. The calendar makes organizing projects by due date easy. You can quickly see what's coming up and space them out when a larger project takes more time. The search function to find past projects is imperative. Doing takeoffs is much easier now. I can export final dwgs and reports so that my sales rep can go back and see exactly what I quoted and where. All the work is saved so I can back and reference it or change it if plans change. The lines and symbols are easy to read and quick to set up. You can dimension the plans when needed and add call outs. The cloud tool is useful for items I have a question about. I can even copy and paste a line several times instead of having to draw it out each time. Being able to add labels to the takeoff is crucial. It makes my quotes much more powerful when I say exactly where I found each product. It also helps if there is a change to the plan later. I can easily remove one section by using the Geometric Report instead of having to dig through all the plans. The ability to use two screens is awesome! When I find a particular detail and have to match it to the plan, it is much easier to have one screen with the detail and one with the plan.

Inconvénients: Some things are not customizable. I can't change the default dimension color or size. But once you set it, it remembers the changes for that page only. I can't rearrange the sheets with the tabs on top. I have to open them in the order I need. So if I find a detail on another sheet, I may have to close some tabs and them reopen them in the order I need. It does integrate with Excel reports, but Excel charges a monthly subscription for that. I am also waiting for the symbol search tool.

I've tried the rest, Stack is clearly the best.

Publié le 22/01/2019
Jeff V.
Senior Estimator
Construction, 51-200 employés
Temps d'utilisation du produit: plus de deux ans
Provenance de l'utilisateur 
Source : SoftwareAdvice
5/5
Note globale
4 / 5
Facilité d'utilisation
4 / 5
Fonctionnalités
5 / 5
Support client
4 / 5
Rapport qualité-prix
Probabilité de recommander le produit :
Très faible Très élevée

Commentaires: Over the last 15 years, I've been with 2 companies prior to my current and, at both, I encouraged the Owner to purchase Stack (Cloud Take-off previously). Most were hesitant due to ongoing subscriptions with other platforms but eventually I was able to get, at minimum, the take off program. I haven't tried the estimating version and would try it if I could ever get the time to sit down and populate all the different assemblies, vendor pricing etc. The other issue is purchasing something untried and untested to our company specifically tailored to how we function. I think an extended trial period for that training and tailoring to our needs might be enough to justify the upgrade.

Avantages: The greatest feature is the ease of use. They kept it simple for the take-off, genius on the auto-save. Of course, the cloud-based feature. No more bringing home the laptop, cables, plans, specs. Quick uploads and tons of memory for those large jobs.

Inconvénients: Had issues with Silverlight running on MAC in earlier versions. ( wasn't a huge deal and I believe when Stack took over they fixed the bugs). I'd like to see options when drawing a linear measurement to have various dashes or hashes for lines would be helpful. For example, on other platforms I could indicate through-wall cf with a red dotted line while below do a solid line indicating another linear measurement such as expansion joint. You would then be able to visually identify to different terminations on the same linear measurement. Just a suggestion.

Darn near perfect.

Publié le 20/01/2017
Nick C.
Project Manager
Construction, 51-200 employés
Temps d'utilisation du produit: plus de deux ans
Provenance de l'utilisateur 
4/5
Note globale
4 / 5
Facilité d'utilisation
4 / 5
Fonctionnalités
5 / 5
Support client
5 / 5
Rapport qualité-prix
Probabilité de recommander le produit :
Très faible Très élevée

Commentaires: Having used Stack for the better part of two years, I can say it has greatly improved our takeoff speed and provided the ability to accomplish several time consuming tasks quickly. Stack features allow me to achieve a great degree of accuracy, and they seem to constantly improve the product with new tools like the snap feature. In the future we look forward to deploying Stack to an even greater extent to win more work, and generate more revenue!

Avantages: First and foremost, I enjoy the takeoff speed and accuracy Stack affords our estimating department. Simply by clicking a link on a plan exchange site, or quickly uploading plans, we can begin a highly detailed accurate takeoff in minutes if not seconds. Likewise, we can complete our takeoff much faster than traditional methods saving valuable time to analyze our bids post takeoff.

Inconvénients: Like any good cost hawk, I would highlight price as my least favorite aspect of Stack Software; though I will say the product represents good value for the price! I would like to see Stack offer the complete product in one package, without the present tiered pricing.

Réponse de l'éditeur

envoyé par Stack Construction Technologies le 25/01/2017

Hi Nick,

Thanks so much for your recent feedback!
We are so glad to be able to support the takeoff and estimating needs of Samuel Dean Sheet Metal and so happy to hear that our software is having a positive impact on your bid process.

We look forward to sharing your input with the entire STACK team. Have an awesome day & thank you again!

Lire d'autres avis