Note moyenne

  • Note globale
  • Facilité d'utilisation
  • Service client

En savoir plus sur Ansys Discovery

ANSYS Discovery fournit une simulation 3D instantanée, étroitement couplée à une modélisation géométrique directe.

En savoir plus sur Ansys Discovery

Filtrer les avis (8)

Note du produit

Note du produit

Utilisation

Classer par

Avez-vous déjà utilisé Ansys Discovery ?

Partagez vos expériences avec d'autres acheteurs de logiciels.

Filtrer les avis (8)

Godwin A.
Godwin A.
Additive Manufacturing Engineer (Nigeria)
Utilisateur LinkedIn vérifié
Génie mécanique ou industriel, 11-50 employés
Temps d'utilisation du logiciel : plus d'un an
Source de l'avis

Simulation and Experimentation in Real Time

5 il y a 5 mois

Commentaires : Ansys Discovery is relatively easy to use and it gives real time simulation at its best as you don't get to wait long period of time just to get results, they are delivered instantly in the explore mode. With this, you can easily experiment with different materials and conditions without having to wait for results as long as the solving is turned on. As materials are being changed, results are updated automatically.
Multiple studies can be carried out in the same project including mechanical, thermal and fluid flow. I get to easily import geometry directly as native CAD files of Autodesk Inventor and SolidWorks without have to convert them.

Avantages :

The user interface is very interactive with an heads up display (HUD) that tells you what information is required to complete whatever study(ies) to be carried out and as soon as enough information is supplied, results can be gotten instantly.

Inconvénients :

Due to its real time nature, performance relies heavily on system GPU so you might need to follow the minimum system requirements. I noticed a restriction on exporting files to only discovery file format.

Michael A.
Head of Engineering (Suisse)
Génie mécanique ou industriel, 11-50 employés
Temps d'utilisation du logiciel : plus d'un an
Source de l'avis

Instant Simulation with direct modeller

4 le mois dernier Nouveau

Commentaires : It is a very useful tool at design finidng phase of a product

Avantages :

I like the combination of a 3d direct modeller with the super easy simulation feedback. Design iterations are made instantly

Inconvénients :

I would like to be able to have orthotropic and anisotropic material models

Ewen C.
Product Development Engineer (É.-U.)
Automobile, 10 000+ employés
Temps d'utilisation du logiciel : plus d'un an
Source de l'avis

It's a good start, but there are a lot of opportunities for improvement.

1 le mois dernier Nouveau

Commentaires : It's a good start. The very quick solution turn around using GPUs is definitely a benefit. But the limitations and clunkiness of the program makes it such that I can hardly use it ever (because my models requires a capability that Ansys Discovery Live currently does not or cannot offer).

Avantages :

With the proper and appropriate hardware, you can obtain a solution significantly faster than conventional solution methods by leveraging the power of GPUs, even older ones. For simple problems (i.e. single parts and/or basic external vehicle aerodynamics), it is very easy to set up.

Inconvénients :

I'll give what I think are opportunities for improvements based on domain. Static structural - does not handle multiple parts/complex assemblies very well. Does not/cannot model non-linear contacts. Does not/cannot simulate non-linear materials. Defining and applying custom materials is sometimes quite cumbersome. Fluids - Cannot extract important engineering values from the fluid simulation, e.g. coefficient of drag/coefficient of lift from the external aerodynamics example. Cannot select other turbulence models. (Last I inquired, you can ONLY use the LES turbulence model, which is invalid for certain types/classes of analyses.) Cannot model air as an ideal gas (compressible flow solver). Cannot define point heat sources. Direct modelling/manipulation - if you have a part with defined dimensions (part from print), it is quite cumbersome to reproduce the part using the direct manipulation method. Direct manipulation method is great when you are trying to experiment with new designs and you are trying to figure out which design will work best, but if you are trying to test/verify an existing design and you don't have the original/source CAD part, which requires you to re-model it in Ansys Discovery Live/SpaceClaim, it's ridiculously complicated to create, for example, a dimension that is symmetrical/mirrored. Topology optimisation - Sometimes the result from the topology optimisation does not pass the FEA analysis.

Bruce K.
Mechanical engineer (Australie)
Exploitation minière et métaux, 10 000+ employés
Temps d'utilisation du logiciel : plus d'un an
Source de l'avis

Simple and accurate

5 le mois dernier Nouveau

Commentaires : Working on a structural frame, the model appears to be meshed as a single part but the deflection simulated was actually measured on the completed structure. the simulation was completed in 1 hr!

Avantages :

Discovery is pretty basic to use and fast, the results are comparable to ANSYS but are limited. This is a very good step in the design concept stage.

Inconvénients :

We use Ansys for calculating stresses in an assembly, we have a significant expense in the licenses of Ansys however Discovery is so simple to use and is very effective on the simple models, I feel it could be cheaper. Many cad packages have inbuilt FEA which is also effective , With all the subscription charges our office incurs, we would be better off outsourcing the design work to our Indian offices.

Luca N.
R&D Hydraulic manager (Italie)
Génie mécanique ou industriel, 201-500 employés
Temps d'utilisation du logiciel : plus de deux ans
Source de l'avis

a satisfied customer

4 le mois dernier Nouveau

Avantages :

the fact that rapidly you can change and evaluate shape, and then deeply analize with the premium release

Inconvénients :

the connection with the premium solver, not always an easy transition

Manmohan M.
Sr. Manager Solutions Architect (Inde)
Matériel informatique, 10 000+ employés
Temps d'utilisation du logiciel : plus d'un an
Source de l'avis

Amazingly Interactive tool

4 le mois dernier Nouveau

Commentaires : Na

Avantages :

Ease to use. Few clicks to make an sample test case.

Inconvénients :

Installaing on a remote server without GPU is slightly painful.

Chris G.
ENGINEER (É.-U.)
Génie mécanique ou industriel, 51-200 employés
Temps d'utilisation du logiciel : 1 à 5 mois
Source de l'avis

Interesting idea, but FEA is 'HARD' for a reason...

2 le mois dernier Nouveau

Commentaires : Use it for educational purposes only. Change the interface to be more compliant with other Engineering software and the Guidelines and styles as defined my Microsoft for Windows 10,11, etc... products.

Avantages :

The 'instant' or 'live' results has some educational possibilities, but is limited by other issues.

Inconvénients :

The interface is completely unlike and OS or Engineering software suite in use. When using with SW or CREO, for example into Discovery for analysis, users are completely dumbfounded. Discovery is extremely limited without a 'full' ANSYS workbench license. If I have the Workbench license, the Workbench UI is cleaner and easier to use. Symmetry planes, contact types, convergence reports (in my case) 'on the fly analysis' were completely missing.

Xiangjie Z.
Engineer (É.-U.)
Transport routier/ferroviaire, 10 000+ employés
Temps d'utilisation du logiciel : 1 à 5 mois
Source de l'avis

good software

5 le mois dernier Nouveau

Avantages :

easy to use, versatile, a lot of control

Inconvénients :

a little slow, too many information, too many options